Item # SG6140-2, Model SG6140 High Pressure Purifier on Advanced Specialty Gas Equipment (ASGE), UOP Distributor

Gas Guide Regulators Special Applications Gas Delivery Equipment Flow Measurement & Control Purges & Valves Filters & Purifiers Ancillary Equipment Adsorbents Reference

Material Safety Data Sheets Safety Solution Bulletins Instruction Booklets

		\| Shipping \| Tax \| Terms

Request for Quote	0 items


All Categories > Cylinder Containment > SSR Series Stationary Cylinder Storage Racks > Cylinder Accessories > PR Series Stationary Cylinder Stands & Process Racks > Model SG6140 High Pressure Purifier > Item # SG6140-2

larger image

Item # SG6140-2, Model SG6140 High Pressure Purifier
QUOTE

Model SG6140 purifier is designed to remove water and/or oil from gas or liquid streams. In the laboratory, it protects delicate or sensitive instruments, prolongs service life and provides more accurate, reproducible test results. This purifier may be used with noncorrosive gases compatible with brass and Viton® at pressures up to 3000 psig.

Three different purifying elements are available. These elements can be replaced without removing the purifier from the process line.

Specifications · General Specifications · Materials of Construction

Specifications

Element Type		Type 4A Molecular Sieve

Removing Application		Water

Water Capacity at Flow Rate of 2 scfm at 80°F (g)		6.0

Replacement Elements		Activated Charcoal Replacement Viton® O-Ring Type 13X Molecular Sieve Type 4A Molecular Sieve

General Specifications

Maximum Operating Pressure (psig)		3000

Pressure Drop at 56 Slpm Air (psi)		1.0

Pressure Drop at 85 Slpm Air (psi)		2.4

Dew Point Obtainable (4A and 13X Molecular Sieve) (ºF)		-100

Inlet & Outlet Connections		1/4" NPT Female

Height		5 11/16"

Diameter (Widest Point)		2"

Mounting Holes (2)		1/4" -20UNC x 3/8" Deep

Approx Weight (lbs)		3

Pack and Install		Elements are shipped in individually packed, hermetically sealed cans to prevent deterioration. They must be installed before using the purifier.

Materials of Construction

Purifier		Body and Cap (Brass) O-Ring Seal (Viton®)

Purifier Element		Electrolytic Tin-Plated Cold-Rolled Steel (Housing) Polyester Felt Backed by Type 316 SS Screen (Retainer)

Desiccant		4A, 13X or Activated Charcoal